Relay for Multi Gas Safety System
The Relay for Multi Gas Safety System is designed to trigger third-party devices like an exhaust fan, BMS, or fire panel for the Multi Gas Safety System. This Multi Gas Safety System Relay will only work with our Multi Gas Safety System.
The Multi-Sensor Safety System is a plug and play with additional components to create a fully integrated system. See parts list below or contact a CO2Meter expert for more information about your application.
Features
- CO2 Levels: relays preset to be triggered at 5,000ppm TWA, 5,000ppm, 1.5%, and 3% CO2 to meet OSHA/NIOSH standards.
- Oxygen Levels: 19.5%, 16.5% and 12% O2 to meet OSHA and CGA standards.
Multi Gas Safety System Components
- Relay for Multi Gas Safety System shown here (CM-7002)
- Tablet for Multi Gas Safety System (CM-7005)
- CO2 Sensor for Multi Gas Safety System (CM-7003)
- Oxygen Sensor for Multi Gas Safety System (CM-7103)
-
Horn Strobe for Multi Gas Safety System (CM-7004)
- Exterior Horn Strobe for Multi Gas Safety System (CM-7004-OUT)
- Mini Display for Multi Gas Safety System (CM-7006)
- Strobe Tower (CM-1026-5)
- 3/8" Solenoid Shut Off Valve (SV-1029)
- 1/2" Solenoid Shut Off Valve (SV-1030)
Specifications
- (QTY-3) 2A Relays in unit
- Normally open or closed (adjustable)
- 25 ft CAT5e Cable
- Connections: Input / Output / Strobe - CAT5 8 pin Connector
Electrical
-
POE provided from main tablet CM-7005. (see CM-7005 product page for system electrical specifications)
Warranty
- 1 year - See CO2Meter Terms and Conditions.
Accessories
The Multi Gas Safety System starts with the CM-7005 tablet. Click on any of the add-on items it can control for more information.
- Multi Gas Safety System Tablet (CM-7005) - Provides a single central display unit for monitoring both carbon dioxide levels or oxygen levels across multiple locations.
- Multi Gas Safety System CO2 Sensor (CM-7003) - Provides real-time CO2 readings for multiple sensors that are controlled by the CM-7005 CO2 multi sensor safety system tablet.
- Multi Gas Safety System Oxygen Sensor (CM-7103) - Provides real-time O2 readings for multiple sensors that are controlled by the CM-7005 CO2 multi sensor safety system tablet.
- Horn Strobe CM-7004 - Audible and visual strobe alarm used for interior placements.
- Horn Strobe CM-7004-OUT- Audible and visual strobe alarm for exterior placements.
- Multi Gas Mini Display System Tablet CM-7006 - Remote display that monitors all or a group of CO2 sensors.
- Strobe Tower CM-1026-5 - Provides a flashing indicator and audible alarm. Changes colors as the alarm level changes.
- Relay Cable CBL-7002 - Enables easy connectivity between the Remote Relay CM-7002, Strobe Tower CM-1026-5 or any external device that can be triggered by a relay.
- Solenoid Safety Shut Off Valve SV-1029 - 3/8 inch connector on electronic solenoid enables remote shut off during gas leak. Plugs into Remote Relay CM-7002 or Main Tablet relay.
- Solenoid Safety Shut Off Valve SV-1030 - 1/2 inch connector on electronic solenoid enables remote shut off during gas leak. Plugs into Remote Relay CM-7002 or Main Tablet relay.
- Calibration Gas - Because of MDOT regulations, calibration gases must be shipped from a certified gas supplier. You can order calibration gas from your local supplier or you can order the following products from CalGasDirect.com
-
Data Sheets
-
Manuals
-
Technical Documents
-
Videos
-
Additional Resources
-
Case Studies