033-9-0010 K33 BLG 30% CO2 + RH/T Data Logging Sensor
The 033-9-0010 K33 BLG (bio-logger) sensor (formerly known as the SE-0027) is designed to measure up to 30% carbon dioxide, temperature and % relative humidity, then record them to internal memory. This makes it an excellent CO2 sensor for enclosed applications like bio-incubators or for portable CO2 meters where sampling of high levels of CO2 is required.
*Please note the sensor diagram referenced in the manual displays an opposite drawing of the actual sensor module itself*
Features
- Measures 30% CO2, Temperature, %RH
- Built-in Memory for Data Logging
- Multiple Industry standard I/O options
Models
- CM-0025 K33 BLG 30% CO2 Sensor Development Kit - Easy to use, simply plug the sensor module into your PC via USB. The Devkit includes a K33 BLG sensor with pre-soldered connectors that provide power and connectivity. Use it for evaluation, rapid application development or for experiments. Uses our free GasLab® software to measure and graph carbon dioxide, to configure the sensor or for data logging.
- 033-9-0010 K33 BLG 30% CO2 Sensor Only - for integration into high-volume OEM products. Contact us directly for wholesale pricing on large quantities of this sensor
Specifications
- CO2 Measurement: non-dispersive infrared (NDIR)
- Measurement Method: Sampling
- Measurement Range: 0-300,000 ppm (0–30%)
- Rate of Measurement: 0.5 Hz (once every 2 seconds)
- CO2 Accuracy: ± 0.2% vol CO2 ± 3% of measured value
- Temperature Range: -40 to 60C
- Temperature Accuracy: ± 0.4C at 25C
- Relative Humidity Range: 0-100% RH non condensing
- Relative Humidity Accuracy: ± 3% RH
- Data logging: 30 seconds to 18 hours sample interval
- Support for real-time measurement with software
- Memory: 5,400 log entries maximum, includes time stamp, co2, temp, RH. 1 additional analog input to the log available
- Available Outputs: analog
- Communication Options: UART or I2C
- Sensor Life Expectancy: > 15 years
- Maintenance Interval: no maintenance required
- Self-Diagnostics: complete function check of the sensor module
Electrical / Mechanical
- Power Input: 5.5-12 VDC max rating, stabilized to within 10%
- Max Current: 250 mA
- Dimensions: 2.0 × 2.25 × 0.88 inches (0.62 inches w/o tube adapter)
Warranty
- 90 days - See CO2Meter Terms and Conditions.
Free Easy-to-use GasLab™ Software
This device uses GasLab® software for setup, calibration, data logging, and real-time data analysis. GasLab® makes it easy to export data into a .CSV file that can be imported into any industry-standard software or spreadsheet. GasLab® runs on Windows XP or higher, and free to use with our products.
Accessories
- Sample Draw Pump Kit - includes pump, hose, filters
- USB Extension Cable - extend USB cable 16 ft. (5m)
-
Data Sheets
-
Manuals
-
Technical Documents
-
Videos
-
Additional Resources
-
Case Studies