Day Night CO2 Monitor & Controller for Greenhouses, Grow Rooms
The Day Night CO2 Monitor and Controller can be used in greenhouses, grow rooms, hydroponics rooms, and other places where elevated carbon dioxide levels are used to maximize plant growth and productivity.
Features:
-
MAXIMIZE YIELDS: maximize yields by +20%!
- ACCURATE and EASY TO USE: CO2 Generator Control
-
INCLUDES PHOTO SENSOR: turns off CO2 at Night
-
PLANT FRIENDLY: no interference to growth cycle
-
USER-CONFIGURABLE: Low Set Point - 800 ppm. High Set Point - 1,500 ppm
Best of all, the CO2 Monitor & Controller is easy to install and use. Simply mount the unit inside your grow room, (all cables and hardware included), plug it into a standard wall jack, plug in your CO2 generator or regulator and it is ready to maximize your plant growing yields.
- See our CO2 Tank Regulator with Solenoid Valve here.
- View our CO2Meter RAD-0501E for Greenhouses with European Output.
Specifications
- Measurement Range: 0-10,000ppm CO2
- Sensor Technology: Non-dispersive Infrared (NDIR)
-
Display: Easy to read display with 3-push button functionality
-
Enclosure: IP54 Enclosure - cover during cleaning, fertilization, or washdown
- Default settings: Low Set Point - 800 ppm. High Set Point - 1,500 ppm
-
Accuracy: ± 70ppm or ± 5% CO2
- Relays: One Relay output, Peak Current < 5A@ 250 VAC, SPST. Normally Open
- Sensor Response Time: < 2 minutes
- Operating Temperature: 32° to 122° F
- Calibration: In-situ with fresh air
- Max Coverage Area: 1,500 sq. ft. with proper air handling
- Sensor Life Expectancy: 15 years
Electrical
- Power: 110VAC Grounded US Plug Only
- Power Consumption: 2 Watts Maximum
- Piggyback Cable: Peak Current < 5A @ 250 VAC
Warranty
- 1 year - See CO2Meter Terms and Conditions.
-
Data Sheets
-
Manuals
-
Technical Documents
-
Videos
-
Additional Resources
-
Case Studies