Digital Gas Sensors for Gaslab Fixed Multi Gas Detector
The Digital Gas Sensors for the Gaslab Fixed Multi Gas Detector are designed to measure combustible, toxic, and oxygen gases as well as refrigerants.
These digital sensors are only to be operated in conjunction with the Gaslab Fixed Multi-Gas Detector series.
These sensors are also not to be used in potentially explosive atmospheres and must be employed in areas within environmental conditions as specified in the attached manual.
In addition, these gas sensors vary by operation dependent upon which gas is being measured and are used commonly for personal protection in hazardous gas environments to ensure safety and protect against exceeded gas safety thresholds during industrial processes.
Looking for a particular gas type or concentration range that is not shown? We offer over 128 gas sensor capabilities, please contact us to learn more
Features
- Accurate, High Quality Sensor Technologies
- Easily Integrated into Gaslab Fixed Multi Gas Detectors
- Low Cross-Sensitivity across multiple gases
- Easy to use, Low Maintenance
- Proven and trusted design - 90 day warranty
Specifications
- Gas Type: Varies by sensor
- Measurement Range: Varies by sensor
- Housing: Stainless Steel, Plastic
- Material: Polycarbonate, CrNi Steel: 1.4404
- Accuracy: 5 ± % sig.
- Display Resolution: 0.1ppm
- Repeatability: 10 <± % sig.
-
t90 Time: 120 ≤ sec.
- Zero-point variation: 5 ± ppm
- Temperature Range: -22 / 122 °F (30 / +50 °C)
- Humidity Range: 15-90 %RH
- Housing Color: Similar to RAL 7035 (light grey), Natural
- Protection Class: IP65, IP64
-
Mounting:
- Screw mounting, external thread M25 x 1.5 mmv
- Screw mounting, NPT ¾“ ANSI/ B1.20.1 / M30 x 1,5 mm
- Power Supply: 5 VDC from Board, e.g. SB2/MSB2, reverse polarity protected
-
Power Consumption:
- Catalytic (Pellistor): 200 mA, max. (1.0 VA)
- Electrochemical: 10 mA, max. (0.05 VA)
- Semiconductor: 160 mA, max. (0.8 VA)
- Infrared Premium: 60 mA, max. (0.3 VA)
- Infrared: 50 mA, max. (0.25 VA)
- MPS: 25 mA, max. (0.13 VA)
- Connection Type: 3-pin connector
-
Cable Length:
- Standard: Ca. 150 mm (5.91 in.) Cable extension (5, 10 or 15 m)
- Cable extension (5, 10 or 15 m)
-
Dimensions:
- Type P: 0.94 x 0.87 in. (24 x 22 mm)
- Type L: 0.94 x 1.18 in. (24 x 30 mm)
- Type S: 1.18 x 2.40 in. (30 x 61 mm)
- Weight: 0.07 lb. (Ca. 30 g), 0.35 lb. (Ca. 150 g)
REGULATIONS
- EMC Directives 2014/30/EU
- CE
- UKCA
- EN 378
- EN 14624
- EN 45544-1, -3
- EN 50104 (for O2)
- EN 50271
- EN 50545-1
- EN 61508-1–3
- EN 61010-1:2010
- ANSI/UL 61010-1
- CAN/CSA-C22.2 No. 61010-1
Warranty
- 90 Days - See CO2Meter Terms and Conditions. (if not poisoned or overloaded)
-
Data Sheets
-
Manuals
-
Technical Documents
-
Videos
-
Additional Resources
-
Case Studies