Analog Gas Sensors for Gaslab Fixed Multi Gas Detector
The Analog Gas Sensors for the Gaslab Fixed Multi Gas Detector are designed to measure combustible, toxic, and oxygen gases as well as refrigerants.
*Please note: these analog sensors are only to be operated in conjunction with the Gaslab Fixed Multi-Gas Detector series.
These sensors are also not to be used in potentially explosive atmospheres and must be employed in areas within environmental conditions as specified in the attached manual.
In addition, these gas sensors vary by operation dependent upon which gas is being measured and are used commonly for personal protection in hazardous gas environments to ensure safety and protect against exceeded gas safety thresholds during industrial processes.
Looking for a particular gas type or concentration range that is not shown? We offer over 128 gas sensor capabilities, please contact us to learn more.
Features
- Accurate, High Quality Sensor Technologies
- Easily Integrated into Gaslab Fixed Multi Gas Detectors
- Low Cross-Sensitivity across multiple gases
- Easy to use, Low Maintenance
- Proven and trusted design - 90 day warranty
Specifications
- Gas Type: Varies by Sensor Selection
- Measurement Range: Varies by Sensor Selection
- Housing: Plastic, Stainless Steel
- Material: Polycarbonate, CrNi steel: 1.4404
- Flammability Classification: UL 94 V2
- Storage Temperature Range: 0 °C to +20 °C (32 °F to 68 °F)
- Storage Time: Ca. 6 months
- Humidity Range: 0–95 % RH non-condensing
- Pressure Range: 90–110 kPa
- Housing Color: Similar to RAL 7035 (light grey), Natural
- Protection Class: IP65, IP64
-
Mounting:
- Screw mounting, external thread M25 x 1.5 mmv
- Screw mounting, NPT ¾“ ANSI/ B1.20.1 / M30 x 1,5 mm
- Power Supply: 5 VDC from Board, e.g. SB2/MSB2, reverse polarity protected
-
Power Consumption:
- Catalytic (Pellistor): 200 mA, max. (1.0 VA)
- Electrochemical: 10 mA, max. (0.05 VA)
- Semiconductor: 160 mA, max. (0.8 VA)
- Infrared Premium: 60 mA, max. (0.3 VA)
- Infrared: 50 mA, max. (0.25 VA)
- MPS: 25 mA, max. (0.13 VA)
-
Serial interface local bus: 1-wire / 19200 Baud
- Connection Type: 3-pin connector
-
Cable Length:
- Standard: Ca. 150 mm (5.91 in.) Cable extension (5, 10 or 15 m)
- Cable extension (5, 10 or 15 m)
-
Dimensions:
- Type P: 0.94 x 0.87 in. (24 x 22 mm)
- Type L: 0.94 x 1.18 in. (24 x 30 mm)
- Type S: 1.18 x 2.40 in. (30 x 61 mm)
- Weight: 0.07 lb. (Ca. 30 g), 0.35 lb. (Ca. 150 g)
- H2S sensitivity % measured gas@ 20ppm H2S < ±3
- H2 sensitivity % measured gas@ 400ppm H2@ 20°C < 15
- NO2 sensitivity % measured gas@ 20ppm NO2 < -60
- Cl2 sensitivity % measured gas@ 10ppm Cl2 < -300
- NO sensitivity % measured gas@ 50ppm NO < 20
- SO2 sensitivity % measured gas@ 20ppm SO2 nd
- C2H4 sensitivity % measured gas@ 400ppm C2H4 <2
REGULATIONS
- EMC Directives 2014/30/EU
- CE
- UKCA
- EN 378
- EN 14624
- EN 45544-1, -3
- EN 50104 (for O2)
- EN 50271
- EN 50545-1
- EN 61508-1–3
- EN 61010-1:2010
- ANSI/UL 61010-1
- CAN/CSA-C22.2 No. 61010-1
Warranty
- 90 Days - See CO2Meter Terms and Conditions.
-
Data Sheets
-
Manuals
-
Technical Documents
-
Videos
-
Additional Resources
-
Case Studies