CO2Meter recently released its highly anticipated GasLab Pro® Multi-Gas Detector to allow the analyzation and data logging of multiple gas concentrations from a single platform.
The GasLab Pro® Multi-Gas Detector is designed to measure up to 4 gases simultaneously:
- Carbon dioxide (CO2)
- Carbon monoxide (CO)
- Methane (CH4)
- Oxygen (O2)
In addition, it measures relative humidity, ambient temperature, dew point, and altitude in real time. This makes it useful in environments such as laboratories, life sciences, scientific, fire suppression, industrial, safety, food and beverage, and many more.
The GasLab Pro® Multi-Gas Detector can be configured to measure CO2 ranges from 0-1% up to 100%. In addition, the portable data logger also includes a large LCD backlit display, audible alarms, built-in data logging capabilities, and a micropump to simultaneously measure multiple gas concentrations through a single sampling port.
"The initial concept was to provide our customers with a truly customizable platform that allowed the customer to "build" the device they needed. Our team elicited feedback from key partners in life science, incubation, and fire suppression to understand the entire scope of their needs across multiple applications. While it was a massive undertaking the GasLab® Pro has quickly become one of our most sought after devices.", stated VP of Business Development, Joshua Pringle.
In fact, CO2Meter uniquely designed the device with a special focus on those in fire suppression industries, as NFPA 12 requires testing at low, medium, and high points within the space. In addition, the suppression system must reach and hold specific CO2 concentrations over a given period of time.
"As long-standing members of the National Fire Protection Association we are delighted to continue to manufacture one of the only devices in the market that exceeds the expectations set out in NFPA 12", Pringle added.
Since CO2Meter, has designed one of the only devices that meet these requirements, we recommend using the GasLab Pro® Multi-Gas Sampling Data Logger 100% CO2 model for those in fire suppression applications. Adding an 0-25% Oxygen sensor would allow for oxygen depletion measurements to also be recorded for this and other suppression applications.
It is important to note, that purchasers should recognize that if they purchase a single CM-1000, they will need to conduct three dump tests in order to complete NFPA 12 requirements. (CO2Meter offers a discount when purchasing three devices so that three points in the space can be measured during a single test).
What the CM-1000 means for customers outside of fire suppression, is that instead of using a handheld gas detector that is limited to single gases or disposable fyrite tubes, now you are able to utilize the GasLab Pro® Multi-Gas Sampling Data Logger and gain accuracy, reliability, longevity, with 64 sensor options!
Yes, you heard that right. Any individual can customize and select their combination of target gases to be incorporated and choose from up to 64 sensor configurations, uniquely dependent upon their industry or use case.
"CO2Meter is delighted to offer the GasLab Pro® Multi-Gas Sampling Data Logger so our customers and partners have a long-term solution to understanding and relying on accurate data about their processes.", noted CEO Travis Lenander.
Lenander added "CO2Meter continues to take extreme pride in being recognized as the 'go-to' source in gas analyzation, detection, and monitoring. We stand by our mission to ensure safety, education, and long-term support while continually developing and providing innovative solutions to customers worldwide."
We bring you the CM-1000, a new level of multi-gas detection so individuals can work across a variety of industries with peace of mind that their research data is being measured and collected accurately.
Additional GasLab Pro® Features Include:
- Gas Concentration Options: CO2, CO, O2, CH4
- Includes: RH, AMB, DP, ALTI
- Additional Gases: any 20mm EC sensor can be added
- Six options for CO2 Measurement range: 1%, 5%, 10%, 20%, 30%, 100%
- Please note: You can only have *ONE* CO2 sensor per device
- Large, backlit LCD display for easy readability including on-screen graphing
- Audible Alarms
- Data Logging with micro SD Card (suitable for all sizes, 16GB included)
- Li-ion rechargeable batteries lasting 30+ hrs.
When it comes to fixed multi-gas detection solutions, CO2Meter also provides the MSC2 series. The MSC2 industrial fixed gas detectors are essential tools for safeguarding staff in various industrial settings against multiple gas hazards.
These detectors are designed to continuously monitor the presence of hazardous gases such as carbon monoxide, hydrogen sulfide, methane, and volatile organic compounds, among others.
Featuring advanced sensor technology and real-time data transmission, MSC2 detectors offer high precision and reliability in detecting even low concentrations of harmful gases. Their robust construction and ability to withstand harsh environmental conditions make them suitable for a wide range of industrial applications, from chemical plants and refineries to manufacturing facilities and laboratories.
Further, the importance of industrial fixed gas detectors lies in their role in preventing exposure to toxic and explosive gases, thereby protecting the health and safety of staff. These detectors provide early warning of gas leaks, allowing for prompt evacuation and remedial actions before concentrations reach dangerous levels. By integrating these detectors into a comprehensive safety management system, industries can ensure compliance with occupational safety regulations and standards, reducing the risk of accidents and enhancing overall workplace safety.
In essence, MSC2 gas detection solutions are crucial for creating a safe working environment, preventing potential health hazards, and minimizing the risk of operational disruptions due to gas-related incidents.
For more information on multi-gas sensing solutions or portable vs. fixed gas detectors, contact us today, Sales@CO2Meter.com.