Accessories
-
Select optionsAccessoriesIndustrial Strobe Siren
The Industrial Gas Strobe Siren (CM-1029) is designed to provide an additional flashing indicator of a potential gas leak in indoor areas...
$291.38 CAD$291.38 CAD$291.38 CAD -
Select optionsAccessoriesFilters & Water Traps for Sensor Pump Kit
The Filters and Water Traps for Sensor Pump Kit are designed to protect sensors from receiving excess water and particulate...
From $7.17 CAD$71.75 CAD$71.75 CAD -
Select optionsAccessoriesK30, K33 Flow Through Director
Flow Directors are designed to transform SenseAir K30 and K33 model sensors from diffusion to sample draw sensors. The tube cap kit...
From $27.82 CAD$57.11 CAD$57.11 CAD -
Select optionsAccessoriesMicro Pumps for Gas Sampling Sensors
These micro gas sampling pumps are designed to provide a constant flow of air across any of our sample draw sensors,...
From $306.03 CAD$306.03 CAD$306.03 CAD -
AccessoriesSolenoid Shut Off Valve - 3/8 inch
The SV-1029 Safety Shut Off Valve automatically shuts off the gas supply in the room or at the tank for...
$730.66 CAD$730.66 CAD$730.66 CAD -
AccessoriesSolenoid Shut Off Valve - 1/2 inch
The SV-1030: Safety Shut Off Valve automatically shuts off the gas supply in the room or at the tank for...
$877.08 CAD$877.08 CAD$877.08 CAD -
Select optionsAccessoriesSensor Tube Cap Adapter for 20mm Sensors
The CO2Meter Tube Cap Adapter accessory easily converts a wide range of gas sensors from diffusion applications to sampling. Tube...
$71.75 CAD$71.75 CAD$71.75 CAD -
Select optionsAccessoriesSensor Tube Cap Adapter for MX Board
The CO2Meter Tube Cap Adapter converts gas sensors from diffusion applications to sampling. These custom tube caps include a ribbon...
$86.39 CAD$86.39 CAD$86.39 CAD -
AccessoriesSensor Pump Kit
This Sensor Pump Kit contains all the accessories you need to draw samples using our SenseAir or GSS sensors, including...
$291.38 CAD$291.38 CAD$291.38 CAD -
Select optionsAccessoriesAccessories for pSense Meter / TIM10 / TIM12
AZ-0011 Data Logger Kit Turns our pSense or cSense CO2+RH/T into a tethered data logger, using your computer's hard drive...
From $57.11 CAD$115.67 CAD$115.67 CAD -
Select optionsAccessoriesWall-Mounted Power Supplies
Our 6VDC and 24VDC replacement power supplies are used to power many of our low voltage, non-grounded devices. Both power...
$57.11 CAD$57.11 CAD$57.11 CAD -
Select optionsAccessoriesCalibration Kit for RH Sensors
These reusable jars are made to easily calibrate relative humidity in the pSense High Accuracy Portable CO2 Meter and our pSense...
$86.39 CAD$86.39 CAD$86.39 CAD -
AccessoriesHydrophobic Vent Filter Kit
Hydrophobic filters cover the inside vents of all our portable ambient air CO2 meters to allow airflow in while keeping out water...
$86.39 CAD$86.39 CAD$86.39 CAD -
AccessoriesNafion Tubing for Gas Sampling Sensors
The Nafion Tubing for Gas Sampling Sensors is a highly selective, semi-permeable membrane to water vapor. If gases inside Nafion tubing...
$262.10 CAD$262.10 CAD$262.10 CAD -
AccessoriesCO2 Tank Regulator with Solenoid Valve
The CO2 regulator and flow meter is designed to work with our CO2 Monitor & Controller for Greenhouses. It can support...
$130.32 CAD$130.32 CAD$130.32 CAD -
Select optionsAccessoriesCertificate of Calibration
Traceable Certificates of Calibration are required for products in ISO 9000, FDA-regulated, government contracted, or other industries that requires traceability....
$219.64 CAD$219.64 CAD$219.64 CAD -
Select optionsAccessoriesProbe Enclosure for Development Kits
The Probe Enclosure for Development Kits is a low cost, maintenance-free way to protect any of our CM-200 Development Kits...
From $109.82 CAD$109.82 CAD$109.82 CAD -
AccessoriesEBL 18650 3.7V Li-ion Rechargeable Battery
The EBL brand 18650 Rechargeable Li-Ion Batteries are a solid value, dependable and fast charging battery. They are ETL certified...
$11.71 CAD$11.71 CAD$11.71 CAD -
AccessoriesRelay Cable for CM-7002 Reset Unit
The Relay Cable (CBL-7002) is designed to be utilized specifically with the CM-7000 CO2 Multi-Sensor System, which can be directly wired to...
$57.11 CAD$57.11 CAD$57.11 CAD -
fixed/wall mountOxygen Deficiency Alarm Display Add-On
This Oxygen Deficiency Safety Alarm Display Add-On is designed to provide additional read-outs to be connected for additional alarm points...
$291.38 CAD$291.38 CAD$291.38 CAD -
fixed/wall mountRemote CO2 Storage Safety Add-On
These Remote CO2 Storage Safety Add-Ons are designed to provide additional read-outs to be connected for additional alarm points -...
$262.10 CAD$262.10 CAD$262.10 CAD -
Select optionsAccessoriesSDK / Sensor Replacement Cables
These high-quality cables are replacements for cables included with our SDKs. They allow you to communicate via USB on your...
From $73.14 CAD$73.14 CAD$73.14 CAD -
AccessoriesUSB 2.0 Extension Cable
These active USB extension cables let you increase the distance between your USB-powered CO2 meter or development kit and a...
$42.46 CAD$42.46 CAD$42.46 CAD -
Accessories10,000k Micro Pumps for Gas Sampling Sensor
These micro gas sampling pumps are designed to provide a constant flow of air across any of our sample draw...
$584.23 CAD$584.23 CAD$584.23 CAD
