Oxygen Enrichment Safety Alarm
The Oxygen (O2) Enrichment Safety Alarm is an ambient oxygen enrichment monitor which is simple to use and maintain. The RAD-0002-ZR-E consists of a wall mounted main sensor unit and a display. It is ranged from 0 to 25% O2 and has both audible/visual alarms set points that meet OSHA/NIOSH standards.
Industries that store and operate with high levels of oxygen need to detect and monitor the levels of oxygen should there be a leak of enriched O2, as this could prove
to be a fire risk.
Our Oxygen Enrichment Safety Alarm is used across a variety of industries such as: commercial dive systems, hyperbaric oxygen therapy (HBOT), gas production and gas blending stations, medical and laboratory applications, mining, steel
manufacture and metal refining, aquaculture and glass manufacturing.
Features
- 24/7 protection for you and your staff against oxygen enriched atmospheres
- 90db audible and visual alarm on the sensor and remote display (90db)
- 3 user-configurable alarms meet all OSHA codes
- The remote display can be mounted up to 300 feet away
- Long-life zirconium oxide sensor, lasts up to 10+years
Add-On Options
- RAD-0022-ZR-E: Display Add On. Designed to provide additional read-outs to be connected for additional alarm points. (up to 3 read-outs per device).
- CM-1027: Dual Strobe Add On Kit. Plug flashing strobes into both the sensor and remote display to give a more visual alarm. Used in high-noise environments or where required by an inspector.
- CM-1026-5: 100-240 VAC Strobe Tower Add-On Kit - yellow, orange, and red indicate alarm levels 1-3. Adds visual notice and high decibel alarm
- CM-1026-6: 24 VDC Strobe Tower Add-On Kit - same features as CM-1026-5 for 24 VDC hard-wired systems
- Certificate of Calibration - Available on request in comments at purchase. For factory recalibration order part no. CAL-0001 here
- SV-1029 - Solenoid Shut-Off Safety Valve
Specifications
-
Measurement Range: 0-25% display
- Display Resolution: 0.1%
- Accuracy: Better than 2% FS
- Pressure Dependence: Not pressure dependent
- Response Time: O2: <2min by 90%
-
O2 Enrichment Alarms (default): AL1 22%, AL2 24%, and AL3 25%.
- Sound Alarm: 90db @ 10cm
- Alarm Response Time: < 60 seconds
- Warm-Up Time: 600 seconds (10 min) for full operating temperature range
- Operating Temperature: -58°F to 122°F (-50°C to 50°C)
- Sensor Life Expectancy: 10+ years
- Weight: 1.5lbs (Monitor only)
- Dimensions: 8.25 in x 7.8 in x 3 in
Electrical
- Power Supply: Output: 12VDC, 2000mA.
- Power Input: 100~240 VAC, 50/60Hz, 0.6A (25 ft. Ethernet cable - included)
- Power Consumption: 3 Watts
- 6 VDC battery backup connections
- Relays: Peak Current < 2A @ 30 VDC or 250 VAC, SPDT
- 4-20mA output
Warranty
- 1 year on the device - See CO2Meter Terms + Conditions
Documents
How to Hard Reset the RAD-0002-ZR-E (pdf)
Hard Wiring Your Oxygen Enrichment Safety Alarm (pdf)
Connecting Multiple Monitors to Solenoid Valve (pdf)
Connecting Multiple Monitors to Strobe Tower (pdf)
Connecting Monitors to CM-1026-5 Tower (pdf)
Connecting Monitors to CM-1026-6 Tower (pdf)
Exhaust Fan Relay Wiring Diagram (pdf)
SV-1029, SV-1030 Wiring Diagram (pdf)
RAD-0002-ZR-E Testing Procedures
RAD-0002-ZR Playlist: Unboxing, Installation, and Calibration
How to Create Your Own CAT-5 Cable
Accessories
- RAD-0022-ZR-E: Remote Display Add-On. This device is designed to provide additional read-outs to be connected for additional alarm points. (up to 3 read-outs per device)
- CM-1027: Dual Strobe Add On Kit. Attach a flashing strobe to both the sensor and remote display to give a more visual alarm. Used in high-noise environments or where required by an inspector
- Certificate of Calibration - Available on request in comments at purchase. For factory recalibration order part no. CAL-0001 here.
-
Data Sheets
-
Manuals
-
Technical Documents
-
Videos
-
Additional Resources
-
Case Studies